Composite decking

Questions About Composite Decking

Before you have a composite deck installed, you might have a few questions. Below is how to look after one, plus links to the manufacturer care guides, including Cladco.

Care guides

Check Your Manufacturer Guide

Cleaning limits, such as pressure washer settings, differ between brands, so always follow the care guide for your own boards. These guides open in a new tab.

Aftercare

How to Look After Your Composite Deck

What to expect when it is new

Many composite boards have a slight shine from the manufacturing process. It wears off within about six to eight weeks of weather exposure, and you can speed it up by washing the deck with warm soapy water and a stiff brush soon after installation. Composite resists rot and damp, but it is not maintenance free, and regular cleaning keeps it looking its best.

Routine cleaning

Clear the furniture and plants, then sweep off leaves and dirt. Wet the deck, scrub along the boards with warm water, mild soap and a soft brush, and rinse. You do not need a specialist cleaner for routine jobs. Clean the deck at least twice a year, in spring and autumn, and more often if it is near trees or gets heavy use. Put furniture back once it is dry.

Mould and algae

Leaves, pollen and soil feed mould and algae, so brush them off regularly. Algae is cosmetic and can be treated. Use a mould and algae remover made for decking, leave it to soak in as the instructions say, then rinse well. Shade and damp make it more likely, so keep the deck clear and let it dry.

Using a pressure washer

Brands differ, so check the care guide for your own boards. Cladco allows a pressure washer below 2,000 psi with a 40 to 60 degree fan tip held 250 to 300mm from the surface, tested on a hidden spot first, but warns it can make screw holes more visible, and a Cladco article on mould advises against it for mould, so keep the pressure low. Millboard also allows up to 2,000 psi, while Wickes advises a maximum of 1200 psi. Some manufacturers do not recommend pressure washing at all on certain older ranges, and holding the nozzle too close can dull or damage the surface.

Stains and spills

Clean up spills as soon as you can. Warm water and mild detergent will deal with most food marks, and a decking grease and oil remover helps with grease and oil. Some manufacturers require stains to be cleaned within a set time to keep their stain warranty valid. Leaf stains from tree tannins fade naturally over several weeks. Always test any cleaner on a hidden spot first.

What to avoid

Avoid household bleach, even diluted, and harsh solvents or abrasive tools, which can discolour, scratch or strip the surface. Do not sand composite boards, as this can void the warranty. Avoid rubber-backed mats, which can mark the boards, and never put a fire pit or barbecue directly on the deck. Do not burn offcuts of composite, but take them to a recycling or waste disposal centre.

Winter

Clear snow carefully, because metal spades, grit and sand can scratch composite boards. For ice, Cladco prefers warm (not hot) water poured over the deck, and if you use a de-icer it recommends one containing calcium chloride, tested on a hidden spot first. It advises against grit salt, harsh anti-slip chemicals and products with added colourants, and suggests non-slip mats or strips for walkways. Check your own manufacturer guidance, as advice varies.

Summer, furniture and heat

Darker boards can get hot in direct sun, so think about footwear on hot days, and avoid reflective glass nearby, which can intensify the heat. Use pads under furniture and planters and lift them instead of dragging, as dragging leaves marks. A parasol helps to limit heat and the damp that encourages algae.

If you have Cladco boards

Cladco is a popular choice locally, and its two main ranges need different levels of care. Signature boards are uncapped, so they are porous, show marks more easily and need regular cleaning, and they carry a 10-year warranty. ProDeck boards have a protective polymer shell, need only occasional cleaning, and carry a 15-year warranty. All composite boards settle in colour over the first few months, and shaded areas can take around six months to weather at the same rate as sunny ones.

Cleaning Cladco decking

Cladco advises sweeping off debris, then scrubbing with hot soapy water or its Ultimate Decking Cleaner, leaving it on for about 60 minutes, and rinsing thoroughly so no cleaner or soap is left behind. That cleaner contains a small amount of bleach, so use it exactly as directed and test it on a hidden spot first. Cladco also warns that suntan lotion and insect repellent may discolour boards, that plant pots can stain without a mat underneath, and that heat from fire pits and barbecues can scorch or warp the boards.

Based on guidance from: Cladco: Composite decking installation guide, aftercare and FAQs | Cladco: Ice and frost this winter | Cladco: Preventing and cleaning mould | Wickes: How to clean composite decking | Millboard: Decking care guide | Trex: Composite deck care and cleaning guide | Wickes: How to install composite decking

Fence Blown Down? Garden Going to Waste?

Tell us what you have in mind and roughly where you are. Free quotes, no obligation. We cover Plymouth and the surrounding areas.

Ask for a Free Quote